High-Performance Single-Component Water-Based Floor Paint

Product Model: DPQ-001, DPQ-002 (Matte Finish Paint)

Description:
This product is easy to apply. Simply clean and dry the surface of the substrate, and then apply with a roller. After 1-4 hours of drying, the surface can be used normally. After 7 days, the hardness can reach over 3H. It offers excellent water resistance, high fullness, a gloss level of 80° or higher, and a wide range of colors to meet your personal needs, creating a unique space.

Applicable Substrates:
Suitable for cement, stone, brick, and other mineral surfaces. Whether for factories, swimming pools, permeable pavement, staircases, or various indoor and outdoor floors and walls, this product can meet your requirements. It is odorless, highly durable, and easy to clean.

Construction Requirements:
For basement and outdoor floors, putty surfaces, and soft substrates, apply a penetrating sealer primer (CDHW-1200 or CDHW-1300) first. For indoor areas, this step is not necessary.

Application Instructions:
Water can be added (3%-5%) before application and mixed well. The product is ready for use without any specific time constraints. It is suitable for both indoor and outdoor use. During application, ensure proper ventilation, maintain a temperature of 5-35°C, and keep the humidity below 75%. The re-coating interval should be at least 1-3 hours (based on surface drying). Do not mix with other paints or organic solvents.

Note:

1. The consumption per coat is approximately 0.2kg/m².

2. For outdoor spraying in winter, apply between 9:30 AM and 4:30 PM to avoid dew and prevent the paint film from becoming wet before it dries. Maintain a temperature of 5°C or higher and a humidity level below 85%. Keep the added water at a range of 5%.